Lab 2 is about using a breadboard. I have had lots of experience with this board, so this was powered through. The lab shows how the breadboard is connected internally. Instead if making wires, I used premade wires from my backpack. #easy Resistor Color code was reviewed and how to read it. Hopefully we are not color blind. XD Used a LED in a very simple circuit to light up. LEDs are polarity sensitive. They will only light up in one direction only. Long lead to the positive side and all will be well.
Picture on Top: Breadboard with a LED in series with a resistor
Picture on Bottom: Resistor Color Code handout chart
No comments:
Post a Comment